|
|
Harmon Kardon AVR
347 $899.00
7.1-Channel A/V Receiver
With HDMI™ Switching and Audio/Video Processing
385W: 55 watts x 7 (All channels operating at full-rated power),
THD <0.07%, 20Hz - 20kHz into 8 ohms
665W: 95 watts x 7, THD <0.07%, @1kHz into 8ohms
Picture this! The AVR 347 not only includes a host of powerful
features such as DCDi® by Faroudja video processing, Simplay
HD™-verified HDMI™ 1.1 connectivity with full audio
processing and EzSet/EQ™ technology – it uses a colorful
user interface to make system setup and operation easier than
ever. Add full multiroom capability with A-BUS® connectivity
and you have pure Harman Kardon® sound everywhere in the house.
|
|
Harmon Kardon AVR 445 $1,299.00
7 x 65W 7.1-Channel
A/V Receiver With HDMI™ Switching
(All channels operating at full-rated power)
Make the switch! With two-input HDMI™ switching, XM-Ready®
and USB connections, and multiple digital and analog inputs (including
The Bridge input), the AVR 445 is ready to handle all your sources.
Digital decoding, bass management and EzSet/EQ technology transform
the most complex system into an accurate, seamless sound field.
A high-current amplifier and a wealth of features complete the
package to switch your home theater to the "perfect"
mode.
|
| |
Harmon Kardon AVR 645 $1,499.00
7 x 75W 7.1-Channel
A/V Receiver With HDMI™ Switching and Audio Processing
(All channels operating at full-rated power)
Versatility at its best! The AVR 645 not only switches two HDMI™
1.1 sources, it is able to decode Dolby® Digital, DTS®
and PCM audio streams from the HDMI inputs. Add USB audio, iPod®
connectivity and XM-Ready® capability to our EzSet/EQ system
and high-current amplifier, and the AVR 645 performs with ease.
Equally impressive on the video side is transcoding so that all
analog video inputs may be viewed via component outputs, and A/V
Sync Delay, which reconnects the timing of sound and images. There
is no better combination of sound and image anywhere.
|
| |
Harmon Kardon AVR 745 $3,499.00
7 x 85W 7.2-Channel
A/V Receiver With HDMI™ Switching and Audio/Video Processing
(All channels operating at full-rated power)
Digital audio meets digital video. The AVR 745's DCDi® by
Faroudja video processing upscales all incoming video to 720p
or 1080i. Two HDMI™ 1.1 inputs are available to decode audio
for true single-wire connectivity. Digital audio extras include
XM Ready® capability, iPod® playback through The Bridge
docking station, and USB playback from compatible computers. Our
EzSet/EQ™ II system, 7.2-channel output, TC 30 remote and
more make this the most flexible AVR we’ve ever produced.
|
| |
Denon AVR-1907 7.1 CH/5.1+2 CH
Independent Zone Home Theater Receiver $549.00
The AVR-1907 incorporates
many key features so that it will become the core to a powerful
home audio system. With the ease of connection and control features
this receiver has to offer, it's easy for the installer or home
owner to connect and setup this receiver for optimum performance.
The high performance capability of this receiver is fine tuned
with the auto calibration feature, as it can compensate for various
room acoustics. An Analog Devices Melody 100 32 bit DSP processor
is at the heart of the decoding system providing stunning realization,
making the listener feel like they were there. Additional multi-room
capability gives further flexibility from this same system to
another area of your home.
85 watts x 7 channels
3 assignable component video inputs
Dual-room dual-source multi-zone output
7.1 channel analog EXT input for HD discrete audio sources
XM Radio ready (Connect and Play antenna sold separately)
Discrete zone 2 pre-amp outputs
Serial IR remote ports
Dedicated iPod port for optional ASD-1R D-dock |
|
Denon AVR-2807 7.1 CH Home Theater
A/V Surround Receiver $1,099.00
The new AVR-2807 adds
many new features to the already acclaimed twenty eight hundred
series receiver line. This receiver will become the core of any
high end A/V systems with expanded audio/video switching. With
a large power section, demanding speakers come alive with its
drive capability. Independent zone switching provides control
of the surround room and a second zone at the same time.
110 watts x 7 channels
1080p HDMI switching
XM Radio Ready
Dedicated iPod port for optional ASD-1R D-dock
Multi-source/multi-zone capabilities
Audyssey MultEQ Auto EQ Setup System |
| |
Denon AVR-4806CI Advanced THX®
Ultra2 7.1 CH Reference A/V Surround Receiver $4,000.00
The AVR-4806CI is the
second edition of one of the world’s first premium A/V receivers
to offer XM Satellite Radio functionality and the first to provide
analog-to-HDMI video conversion to streamline video switching
and to preserve maximum content quality for every source in your
system.
HDMI 1080p switching
1080p Upscaling
PlaysForSure Ethernet Connectivity
DDSC-Digital surround circuitry
Pure Direct mode and AL24 Processing Plus
DENON LINK III, enabling high-speed, high-grade digital signal
transmission
THX® Ultra2 certified· Auto Set-Up/Room EQ
XM Radio Ready
Audyssey MultEq Auto-Setup/Room Eq
One of two world's first receivers to offer scaling for 480p DVD
sources
|
|
Denon AVR-5805CI Advanced THX®
Ultra2 Multi-Channel/Zone A/V Surround Receiver with XM and Audyssey
enhancements $7,200.00
The AVR-5805CI is the
third edition of the world’s first receiver with 10 built-in
170-watt amplifiers, providing up to 22 channels of surround sound.
The AVR-5805CI has new radio and calibration options yielding
even greater performance over its two predecessors enriching the
home theater experience to a new pinnacle. It also carries the
new CI mark for the custom install applications.
Audyssey MultEQ XT Pro calibration installer ready
Audyssey MultEq Auto-Setup/Room EQ
XM Radio Ready
Ethernet Internet Radio
Expanded HDMI Inputs
DDSC-Digital surround circuitry
Advanced AL24 Processing
DENON LINK III, enabling high-speed, high-grade digital signal
transmission
THX® Ultra2 certified
PlaysForSure Connectivity
One of three world's first receivers to offer scaling for 480p
DVD sources |
|
Marantz SR4001 Dolby Digital
EX®/DTS ES® Surround Receiver | $549.00
Talk about a power forward!
This fully capable A/V receiver is definitely not the kind of
“wimp-component” you might find at the beginning of
a competitor’s lineup. In contrast, the Marantz SR4001 brings
you all the circuit sophistication and performance you expect
from us. The only thing missing is the cost of ownership.
80 Watts x 7 Channels All Discrete Amplifier Stages
HDMI (v1.1) Repeating: 2-In/1-Out
On Screen Display
x3 Assignable Component Inputs
S-Video to Component Up-Conversion
2nd Zone Audio Output (Same source)
Dolby Headphone
IR Flasher Input
Learning Backlit Remote
|
|
Marantz SR5001 XM Ready Surround
Sound Receiver | $749.99
The features you want.
The power you need. The flexibility you’ve been looking
for. The Marantz quality you’ve been aspiring to. And it
can add the incredible variety of XM satellite radio broadcasts
to your home entertainment system. All yours in the SR5001 A/V
receiver!
HDMI (V1.1) Repeating: 2-In/1-Out
Dual Component Outputs
XM-Ready with Discrete IR Commands
Up-Conversion to Component
2nd Zone Audio Output (Individual source)
Stereo/Mono Switching for 2nd Zone
Lip Sync. Control
RS-232C Control
IR Flasher Input
DC Trigger Output
New Shallower Chassis (<16”)
90W x7-Ch Discrete Amp
|
|
Marantz SR6001 XM Ready Surround
Sound Receiver | $1,199.99
The "Marantz Sound"
amplifiers. XM ready tuner with discrete channel commands. Audyssey
Auto Calibration for easy tuning of your speakers to your room.
HDMI upconversion with Time Base Correction, RS232C Control, 2nd
zone audio.. Marantz has really packed this receiver with an amazing
set of features, at a budget price.
HDMI (V1.2) Repeating: 2-In/1-Out
Up-Conversion (w/TBC) to HDMI with 480I/480P Converter
Current Feedback Amplification
XM-Ready with Discrete IR Commands
Dolby Virtual Speaker
2nd Zone Audio Output (Individual source)
Audyssey Auto Calibration (Optional microphone is needed)
Stereo/Mono Switching for 2nd Zone
RS-232C Control
IR Flasher Input
DC Trigger Output
New Shallower Chassis (<16”)
100W x7-Ch Discrete Amp
|
|
|
Marantz SR7001 THX Select2 Surround
Sound A/V Receiver | $1,399.99
Here’s a balanced
combination of the performance you deserve and a price that will
ease your way to the highest levels of home entertainment. Of
course it’s from Marantz. And it’s got THX Select2
certification as well. Time to boogie? Time to settle back for
a movie? We think so. And so will you.
THX Select2 Certified
HDMI (V1.2) Repeating: 4-In/1-Out
Up-Conversion (w/TBC) to HDMI with 480I/480P Converter
Current Feedback Amplification
2nd Zone Audio/Video Output
Audyssey Auto Calibration
Dolby Virtual Speaker
XM-Ready with Discrete IR Commands
IR Flasher Input
x2 DC Trigger Outputs
New Shallower Chassis (<16”)
110W x7-Ch Discrete Amp
|
|
Marantz SR8001 THX Select2 Surround
Receiver | $1,999.99
Do you call the SR8001
an “audiophile’s receiver” or a “videophile’s
receiver”? May we suggest that the answer is simply “Yes”?
Here, you’ll find the power, flexibility, and advanced performance
you expect from Marantz. And a few surprises, too! All in a new
chassis size that’s more convenient than ever
HDMI (v1.2) Repeating - 4 In, 2 Out
Up-Conversion (with TBC) to HDMI with 480I/480P Converter
Current Feedback Amplification
XM-Ready with Discrete IR Station Access
Assignable Dual Component Outputs
2nd Zone (A/V) and 3rd Zone Audio Outputs (Individual sources)
IR Receiver In and x2 IR Emitter Outs
2 DC Trigger Outputs
Audyssey Auto Calibration
Toroidal Transformer & Copper Plated Chassis
New Shallow Chassis (<16")
125W x7-Ch Discrete Amplifier
|
|
|
Marantz SR9600 THX Ultra2®
Surround Receiver | $4,199.99
Redefines “state
of the art” for surround sound receivers – and for
many separate components, too. Exquisite sophistication coupled
with brute power for the most demanding systems.
THX Ultra2® Certified
140 Watts x 7 - All Discrete Amplifier Stages
THX Surround EX® Processing
Dolby Digital EX®, Pro Logic IIx® (Movie/Music/Game)
DTS 96/24, ES® (Discrete6.1/Matrix 6.1), Neo:6 (Cinema/Music)
SRS Circle Surround II® (Cinema/Music/Mono)
IEEE-1394 (i.LINK) Connection with “Flow Rate” Control
All Discrete/SA Ready “Current Feedback” Amplifier
Stages
|
